The 'Slim Jim' Base RPS is just 160mm Thick, 600 mm Deep and 400mm high... LifePo4 Batteries are Modular and  Can be added ' Plug and Play' Via 2x Inlcuded 175Amp Anderson ports built into the unit. 
The 'SLIM JIM RPS 12VOLT ONLY ' Comes with an Integrated 100amphr Lifepo 4 Slimline battery Batteries - W- A CC Rating of at least 100CC constant load is required to maximise charging and Inverter Efficiency. 
A  second Lifepo4 can be added at any time to extend its storage and Output capacity - without modification to the head unit. via the included 120Amp anderson port on the rear of the case... 
 
All RPS are Game changers for 4wd,  caravaners and campers wanting to keep vans powered in unpowered sites or in off grid environments  - The SLIM JIM Unit Charges via a  Victron 30Amp ( 50amp max)  DCDC charger... The Huge Chargers work Simultaniously - Potentially Punching in up to 50Amps per hour. 
 
 
All Output plugs including the Cig Socket are wired in  individually to allow  them to handle up to  50Amp Current loads, Single Line set up like this also stops single point failure not knocking out other components. 
 
INPUTS:
1 x 75 Black Anderson for DC in and or Charging Port - Victron 30Amp DC DC charger (can operate at up to 50 Amps)
 
4 x Apare Grey Anderson IN / OUT for Victron 20Amp /240Volt charger 
 
 
OUTPUTS:
 
Typically the base included Consol panel has:
 
1 x CIG socket
4 x Grey 175amp  Andersons for Battery Connection
2x USB Plugs
1 Volt Meter
1x 120 Amp Anderson Battery Connectors


Internal Chargers
 
30A Victron DC DC charger

External 30AMP AC charger optional
 
WEATHER RESISTANT BASH RESISTANT BOX: 
3mm Australian Made Aluminium Case - Removable top / sides and face console.  600mm deep x400  High x 160mm wide
 
INTEGRATED Battery: 
100amp hour High Output (100 - 200Amps)  Prismatic Integrated BMS Lifepo4 - SOld here

- https://www.toughtouring.com.au/product-page/100-amphr-lifepo-4-slimline-battery-150amp-constant-load

ADDITIONAL Leads Are not included - and will likely be required for typical 4wd use if you don't have them already. We have leads in kits available on our website, Use the SEarch field - Search " LOOM KITS"
 
NO Loom Kits Included with the Unit.  
Most customers will typically need 1 x 1.5m Solar Input cable - RED anderson to Red Anderson (To Plug any roof mounted solar panel into the RPS Box) 
 
2 x 12 Volt Output cables  - GREY anderson to GREY anderson ( Extension Leads to Plug in Fridges, Travel Buddies, (1m Length)  Compressors etc)
 
1 x 1m Black to Black Anderson Extension Cable, (DC Extension Loom from Below to the RPS unit)
 
DCDC WIRING LOOM KIT - 75Amp  rated DC Wiring Loom from Cranking battery to the RPS, We make and sell these as a kit https://www.toughtouring.com.au/product-page/dcdc-loom-kit-for-renewable-power-station-dual-battery
 
There is a Generator Earth point built into each unit as per Aus Spec... You will need a cable and Spike if your are going to  go whole hog as per Safety regs in Australian Electrial laws.
 
This Box is designed to be weatherproof, however power through fittings cannot be used when wet and water ingress and damage to the unit is unavoidable if submerged.