TRADE - 3 SETS Universal Awning to Bundutop tent Brackets
These brackets provide twin 3mm plate steel ridgid Awning Mounts,They are strong enough to handle the most heavy duty of Pole less awnings.
This Listing is the couble folded 'Spaced out ' version of our popular Awning tto Bundutop brackets - designed to push the awning out 20mm from the edge of the bundutop to prevent the lid fouling on the awnings top edge...
The Brackets Mount up "inset' on the tents sides - Providing a narrower footing for shorter awnings, as well as a tighter swing and less gaps between tent and awning.
The Kit comes with our world famous integrated Adjustable hook bracket - in this kit, allowing adjustment of awning tension on the fly using a 13mm Spanner and a 6mm Allen Key.
The Kit comes complete with
- Sealed Rivetts and 10/6 High Tensile M8 Bolts to help ensure a quality fit up. Videos are provided on our you tube channel to assist home builders and pro fitters alike.
The Kit supports : (Quick Pitch, , Alucab 270, Howling moon 270 and 270 forward fold 180, Bundutec 360, Bundutec 270 and Bundutec 'L' Bushwakka 270 Extreme Darkness, Bush wakka 180 Extreme Next Gen (1950 back plate) , Eezi Awn Manta 270, Darche 180 double end and single end, Darche 270, 30 second awning, BushWakka 180/270 and forward fold 180/270, and BOSS 270 (BA 270 Awnings)
The Bush Company XT MAX, XT 270, XT 180 and XT 180 Double End -are all supported and work in well with this kit., However the hook bracket cannot be used on Bush company awnnigs as their Last arm is covered in canvas and the hook will wear it.
This Kit SUPPORTS ALL KNOWNS AWNING BRANDS that have a Back plate length of 2m or longer... but if your running Ostrich wing - your better off with that specific kit listed here
https://www.toughtouring.com.au/product-page/bundutop-tent-to-ostrich-awning-brackets
If running these awnings - PLEASE ENSURE YOU MEASURE THE BACK PLATE LENGTH - as they need to be at least 2m LONG to work with this kit.
ALUCAB and HOWLING MOONThis Kit now supports Alucab , Howling Moon and quick pitch awnings (These awning run a 4 bolt x 50mm pattern and the Awning brackets supplied are now cut into this pattern to suit)
We would reccommend for the Southern States to Keep awning sizes under 12 sqm to avoid wind damage. MOST TENTS ARE ONLY STRONG ENOUGH TO HANG SINGLE HINGE AWNINGS. in winds over 15Knots..... (MAX 12 SQM).
BUNDUTOP TENT NOTES:
The Bundutop Tent is shorter than most at just 2.1m long, and its large flat faces make it ideal for fitment of awnings - The Bundutop tent is Capable of taking Double ended Bush company XT 180 Awnings - as well as the XT max - However we do reccommend carrying poles and Guy ropes for any 180 section of the awning, as these awnigns have uneven twist behaviour in even mid strength wind -thus exerting added twist pressure on just the one side of the tents they are fitted too..
AWNING Postitioning INFORMATION IMPORTANT
Brackets fitted to Bundutop Tents sit flush with the base of the tent - making them OK to install directly onto the lid of canopy or Racks that are wider than the tents base...
All Other Tents Bracket systems (ALL CLAMSHELL TENT BRACKETS) DONT fit flush beside the tent and require the tent to sit on a rack ABOVE the canopy. Some tents like the EEzi Awn tents brackets have to sit below the tent as far as 90mm.
MEASURE and Check. The awnings are usually about 20cm top to bottom thickness - Ensure there is room beside the tent and if its a clamshell tent, below it as well ... Open doors etc, check they will open under the installed awning.