Tough Touring makes a Super Low mount  roof top tent rack specifically for the Land Cruiser  120 and 150  Series Prado  -  The Rack is Specifically built  to suit the prado using Lightweight components that are immensely strong.
 
The Tough Touring Roof Top Racks are  Capable of handling typical Hardshell Tent loads in harsh off road environments - and can withstand a lifetime of punishing corregation abuse with their zero weld, M8 Bolt up structure. The Tough Touring Racks  sit so low they help reduce vehicle body roll and wind noise - the light weight, forward positioning and Lowest possible mounting position of often heavy roof top tents will  also help minimise negative effects of your tent on vehicle stability.
 
The Touring Tent racks are designed in a 1 piece "outfolded" rail - so that the rack planks bolt to the roof rack rails 'Beside the vehicle' making the installation and any change over as simple, painless as possible. 
 
No other system has been designed in the world that is as low / simple or as strong. 
 
 
Cusomers preferring to Mount tents to the 'Backbones only' or roof rack rails can also select 'Roof Rails only' to lower the tent around 30 mm Lower... Not all tents can be fitted this way. - However Tuff Trek Mk3 and Tough Touring MK 1 Rtt can be as they have East west structure built into the tents already. Many tents of Chinese manufacturing origin can also be fitted this way, simply remove the existing north south fitting rails off the tent, and instead install 4 x Top hat cross planks that come with the Tough Touring rack (optional 4th Plank) straight to the base of the tent - in so adding the required floor support.
 
Pole less wing awnings are typically best mounted to the side of the roof top tent where possible. Tough Touring makes both of these Bracket systems -
 
The Awning to Tent   brackets are listed here https://www.toughtouring.com.au/tent-to-awning-brackets
 
In the event that your tent cannot accept awning mounts to the tent directly - the only option remaining is to fix the The Awning to Bar Planks - We do an option of  Brackets here - There are many variations to peoples set up, the variations are listed here https://www.toughtouring.com.au/product-page/awning-to-tough-touring-rack-bracket-up-or-down-mount
 
The Roof top tent Rack your buying weighs around 23Kg complete with all fitting hardware and Planks. - 
 
ABOUT THE INCLUDED TOP HAT BAR PLANKS 
Our Unique Top Hat Folded Aluminium Planks are slotted to  marry up to the roof rails - There are  "3 x Top Hat Bar Planks"  in the kit - for easiest tent removal/ - There is an option on the listing to add a 4th plank if desired or required as per above... 
 
 \ The Top hat bar planks can included at varying widths to  allow space outside the tents width to fit up Awning brackets and thus achieve an ' independent Awning to Tent '   installation  our Tough Touring Awning to Rack Brackets shown here 
If your going to run the Awning seperately to the roof top tent, its best to order the Top hat bar planks 50mm WIDER than your roof top tent. Its also best to Get the 4th Top Hat Bar plank option in the awning brackets kit - as its best to install 2 Planks for the Awning, and a different 2 planks for the tent, so that either or are removable independently. 
 
More information here on Independent Awning and TEnt Installations.. 
 -https://www.toughtouring.com.au/independent-tent-to-vehicle-kits
 
NICE FEATURES - WHY THIS RACK FOR THE PRADO
The 150 series rear barn doors have no major issues with the majority of roof rack to roof tent installations... We've gone through 6 variations of test racks before coming up with the right balance of low profile / vehicle balance and a foul free fit up - of popular wing awnings, and our rack allows the 270 awnings to be correctly positioned  to  cover the gap between the awning and the door to keep the rain OUT. 
 
The Toyota 150 ans 120 SERies   Tough Touring  Roof TOP TENT OPTION rack Kits includes:

2 One Piece Mild Steel Infolded ROOF RAILS:
6 abs spacers. 
36 20ml x High Tensile Hex Bolts for rails to feet and planks to rails.
72 washers.
36 nylex nuts.
1 Tube Sikka flex Adhesive sealant.
12 x 40mm Hex Head bolts for feet to vehicle. 
2 x Low Mount One Piece Roof rails - Folded at 105 degrees with 2 Tough Touring logo's fitted on sides 
6 x Rack Feet - Folded at 75 Degrees - Designed to fit Front and Rear Inside the roof rail, middle one outside the rail for maximum anti twist and easy installation.

RACK PLANKS:
 
3 Tough Touring TOP HAT Bar planks - (Ultimate strength) - best suited for wider tents and or point loads - Available in 1350 ,1400, 1450, 1550mm
 
All parts cut in Australian MILD Steel or Alumiuminm, SandBlasted for Maximum Paint Bond  and Powdercoated in Black Dulux Textura for ultimate durability and rust resistance.