Toyota 200 Series Roof Top Tent Rack
Tough Touring makes a Super Low mount, outward folded roof top tent rack for the Land Cruiser 200 Series - it is specifically built to get roof top tents lower than previously possible - Its a Versatile Design, Allowing Owners to change between roof tents easily. (Tents are removable)
The top tent and mounts bolt to the roof rack rails 'Beside the vehicle' making the change over as simple, Just 3 Bolts each side for the planks.. Easy access .
No other system has been designed in the world that is as low / simple or as strong.
Pole less wing awnings can also be incorporated into the Roof top tent rails, They are listed on our site as 'Awning to Tough Touring Roof top tent brackets'
The Roof top tent Rack option itself weighs around 23Kg complete with all fitting hardware and Planks. -
Our custom designed rails and crossbars come in an "outfolded" Configuration - Creating the lowest and strongest mounting rack/ foundations for your chosen roof top tent and Awning .
ABOUT THE ROOF TOP TENT RACK OPTION.
This option comes with Unique type of Rack Planks to marry up to the roof rails - "3 x Top Hat Bar Planks" are supplied for Ultimate strength and easiest tent removal/ Each Bar Plank can handle heavy duty point loads, While they also allow independent Awning to rack installations with Pre -drilled mount points already cut using our Tough Touring Awning to Rack Brackets shown here
The Tough Touring Roof Top Racks are Capable of handling typical Hardshell Tent loads in harsh off road environments - and can withstand a lifetime of punishing corregation abuse with their zero weld, M8 Bolt up structure. The Tough Touring Racks sit so low they help reduce vehicle body roll and wind noise - they also improve vehicle stability.
The Landcruisers rear Tailgate door allows foul free fit up of popular wing awnings, and our rack allows the 270 awnings to be correctly positioned to cover the gap between the awning and the door to keep the rain OUT. Designed to minimise awning fouling on the rear wind fairing. The combination of either of our Rack options and our Awning brackets makes for a truly special set up on the cruiser.
The front and rear top hat planks are pre drilled to accept our Pole less wing awning brackets, giving immense twist strength and a super stiff mount point for oversized wing awnings.
If your Going to run a low sidewalll Roof top tent - or a plastic tent and cannot ensure tent stiffness for Pole less wing install - see the information page here on options to install your Pole less wing awning directly to the rack (Independently to the tent) - https://www.toughtouring.com.au/tent-to-vehicle-kits
The Toyota 200 series Tough Touring Roof TOP TENT OPTION rack Kits includes:
ROOF RAILS:8 abs spacers.
44 20ml x High Tensile Hex Bolts for rails to feet and planks to rails.
84 washers.
42 nylex nuts.
1 Tube Sikka flex Adhesive sealant.
16 x 40mm Hex Head bolts for feet to vehicle.
2 x Low Mount One Piece Roof rails - Folded at 80 degrees with 2 Tough Touring logo's fitted on sides
8 x Rack Feet - Folded at 75 Degrees - Designed to fit Front and Rear Inside the roof rail, middle one outside the rail for maximum anti twist and easy installation.
RACK PLANKS:
3 Tough Touring TOP HAT Bar planks - (Ultimate strength) - best suited for wider tents and or point loads - Available in 1350 ,1400, 1450, 1550mm
All parts cut in Australian MILD Steel, SandBlasted for Maximum Paint Bond and Powdercoated in Black Dulux Textura for ultimate durability and rust resistance.
*Unique Design means all bolts to roof rack planks are accessable from beside the vehicle for easy removal once fitted.
Please complete the below fields so we can give you the right width planks to suit your tent , awning or Tent and Awning combination.
Please tell us which Roof tent your fitting
Its also handy to know if you intent to fit an awning to the tent, We also make awning to tent brackets that integrate well with most setups.
Technical / Fitting
Fitting:
Tough Touring roof rails can be fitted by any roof rack fitter, or yourself if your handy. Included is a tube of Sikkaflex 221 Automotive sealant and new High tensile steel mounting bolts. Adding the rail planks is easier on the back - as the unique design of the TT roof rails allows all bolts to be accessed from beside the vehicle.
Adaptability:The Roof racks have been designed by us to to accomomodate awnings and roof top tents specifically without fouling on Vehicle wind fairings etc on most popular awning brands available toda
Our Vehicle Specific 'One Piece ' roof rail Kits for the vehicles above follow the vehicles roof lines perfectly while positioning the rack precisely around foul points / Protruding wind fairings - they have been tested with most of the awning and tent combinations listed and are the closest possible fit we can achieve.
Listed on the Store page are extra Top hat bar planks to add to your roof rail while the tent is removed - You would typically require at least 4 slats to create a functioning roof rack. (The Front and Rear Tough Touring Slats remain on the rails as the tent is lifted off, two slats would go up and off still fixed to the tent, So purchase an additional 2 slats - Bolt them on while the tent is off, and fitted you would then have 4 slats back on the car for a functioning rack - (and no need to remove the awning...Which stays fitted to the front and rear tough touring slats.) You could add up to 10 in total....