Patriot Camper X1 Roof Rack
The Tough Touring Patriot X1 Roof Rack has been a highly Successfull Addition to the Patriot trailer. Adding the required height to mount a fixed Awning and a roof tent, As well as creating a 1700 x 1900 x 320mm loading Tray area for large / bulky items like firewood, camp chairs, tables, etc.
The Kit Now includes an extra plank to enable front enclosing Max Trax holder s to be fitted - along with pre drilled aluminium plates that accept Pins for up to 4 x Max trax or Tred Pro Recovery tracks.
Tough Touring has been building racks for Patriot Trailers X1, X2 and the N versions of these trailers now for 3 or 4 years... . They have had many updates to improve usability and minimise impacts on the trailer over this time, - at time of writing (2026) weve had not had any foul issues at all for over 2 years and are satisfied that the rack is as good as it can be.
Changes in customers using chinese tents have prompted us to include 2 of the top hat bar planks in steel for our Version 13 release of this rack, So nowdays to get 2 planks in steel and 3 in Aluminium - the reason for this is to prevent point loaded flex through the planks (Chinese tents are putting their mounting rails increasingly closer together, some are now sitting at 650mm apart!).
More Video of the Kit installed available here on you tube - (the Video was filmed in Melbourne on completion , its a 2015 Model, fitted with a Bush Company XTmax Awning and Boss RT 1 Roof top tent.
The Rack KIT comes complete with 4 x 1400mm Aluminium TOP HAT BAR PLANKS - offering lightweight yet solid support for your roof top tent. You can opt for wider ones if your going to run bigger tents (Like the Popular Bundutop KING which requires 1550mm planks - These are listed in the options below)
The Rack complete weighs in at a hefty 50 KGS as shown in Pics... - The Kit is shipped in two large boxes - 45 x 2.2 x 15cm (Approx 25 kgs each) - If you add weight of a Large roof tent and awning you end up with around 180kgs total weight added to the trailer.
This sounds a lot, but the existing Tent and awning when removed add up to around the same weight. No Major Net gain or win weight wise anyway.
We get asked a lot if we also make a rear door for the rack, We don't - We have found it to be laregly un-necessary, preferring to use a large item strapped in at the rear as your rear entry barrier... (I use an Old Double Camp chair that the dog sits on as my rear 'barrier' its just the right size and the first thing to come out of the trailer at any stopo anyway. These Racks are being fabricated 5 at a time - Many Parts are shared over the 4 Patriot Models that we build them for. (x1 X1N, X2, X2N ) and while we aim to always have them in Stock - Our Worst case Scenario can have Order to Delivery times can be as long as 3 weeks We stress that they are MADE TO ORDER, If your in a rush pop us a line to see whats here before you purchase.
The Tough Touring x1 Conversion to Bundutop Roof tent NOtes:
Many customers are opting to upgrade the Patriot trailer into a fast set up Touring trailer using Bundtuop Tents, These can also be fitted with Massive solar panels,
The Awning to Tent bracket options are also installed and are available seperatly on our store page here - "Universal Awning to Bundutec Bundutop Roof tent UP mounts " They have been designed specifically to lift and secure your chosen Awning UP a bit higher to give you 1900-1950mm of standing height below the awning when up.
SHIPPING
More info can be found here.
Installation
Were Reccommending customers installing this rack on the X1 first seal up the Old mounting bolt holes with the included SikkaFlex sealant - let it dry then install a 1900 x 1500mm 2.5 mm Chequerplate Aluminium Sheet right in the middle of the 1700mm roof. This leaves 100mm Shelf space on the outside edge of the rack, and provides an excellent durable surface to load gear under the rack. A Touring Game changer, Its like you have a ute tray with you for gear stowage, The Included Max trax PIN holder Plates can be bolted to the front (included) extra 5th Plank, as an effective Front barrier wall... and the large holes in the side profile of the rack are large enough to gain access to the insides with your hands.
Guy / Eye bolts points are able to be fixed to the bolt threads at 16 points inside the rack, allowing strapping down of gear anywhere with ease.
The X1 Patriot Version of the Tough Touring Rack comes in at 1900mm long, and we reccommend the rack be mounted 100mm in from the toe rail on each side of the trailer top - giving a nice full length 100mm wide shelf each side beside the rack and directly above the drop down kitchen bench for all manner of things. Very Handy.
The Newest versions of this rack (This Listing) has a 1 piece each side rack foot . The foot is 1900mm long and is simply squared up in position and can then be used as the drill template for the through tbolts during install.
The Addition of Awning to tent brackets like these - https://www.toughtouring.com.au/tent-to-awning-brackets
Make addition of a fixed Pole less awning simple and far stiffer than the origional set up.
Were reccommending the below Outbound Sheild 6 awnings for excellent quality, coverage and speed / easy set up and pack down...They are a massive unit and have the advantage of excellent wall and guy kits that the others do not have in the event of needing extra shelter space for longer stays.


