The Tough Touring Roof Top Tent Racks  are  Low, Light and Strong as we can build them, They use the Landrovers hidden inset M10 Roof bolts for enormous load strength. 
 
Cusomers preferring to Mount tents to the 'Backbones only' or roof rack rails can also select 'Roof Rails only' to save $500 on planks and to get the tent around 33mm Lower... Not all tents can be fitted this way. - However Tuff Trek Mk3 and Tough Touring MK 1 Rtt can be as they have East west structure built into the tents already.
If your going to install your roof top tent without the top hat cross bars - choose the options "Roof Rail Kit Only" 
 
 
Pole less wing awnings can also be incorporated into the Roof top tent rails, or can be mounted to the side of the roof top tent if desired. Tough Touring makes both of these Bracket systems -
 
The Awning to Tent   brackets are listed here https://www.toughtouring.com.au/tent-to-awning-brackets
 
The Awning to Bar Plank Brackets are listed here https://www.toughtouring.com.au/product-page/awning-to-tough-touring-rack-bracket-up-or-down-mount
 
The Roof top tent Rack weighs around 23Kg complete with all fitting hardware and Planks. - 
 
Our custom designed rails and  crossbars come standard for the Disco in an Infolded orientation, as bolts can be accessed easily at the front and rear of the disco due to the camel hump and tapered/rolled roof on this truck... If you have a particularly Wide Roof top tent (1500mm or larger) you can Opt for in an "outfolded" Configuration - See options on this listing
 
ABOUT THE ROOF TOP TENT PLANKS
Our Unique Top Hat Folded Aluminium Planks are slotted to  marry up to the roof rails - There are  "3 x Top Hat Bar Planks"  in the kit - for easiest tent removal/ \ The Top hat bar planks can included at varying widths to  allow space outside the tents width to fit up Awning brackets and thus achieve an ' independent Awning to Tent '   installation  our Tough Touring Awning to Rack Brackets shown here 
If your going to run the Awning seperately to the roof top tent, its best to order the Top hat bar planks 50mm WIDER than your roof top tent. Its also best to Get the 4th Top Hat Bar plank option in the awning brackets kit - as its best to install 2 Planks for the Awning, and a different 2 planks for the tent, so that either or are removable independently. 
 
The Tough Touring Roof Top Racks are  Capable of handling typical Hardshell Tent loads in harsh off road environments - and can withstand a lifetime of punishing corregation abuse with their zero weld, M8 Bolt up structure. The Tough Touring Racks  sit so low they help reduce vehicle body roll and wind noise - the light weight, forward positioning and Lowest possible mounting position of often heavy roof top tents will  also help minimise negative effects of your tent on vehicle stability.
 
NICE FEATURES
The Discovery rear Tailgate door allows foul free fit up of popular wing awnings, and our rack allows the 270 awnings to be correctly positioned  to  cover the gap between the awning and the door to keep the rain OUT. 
 
The  top hat planks  are pre drilled to accept our Pole less wing awning brackets, giving immense twist strength and a super stiff mount point for oversized wing awnings.

More information here on Independent Awning and TEnt Installations.. 
 -https://www.toughtouring.com.au/independent-tent-to-vehicle-kits
 
The Discovery 3 and Discovery 4  Tough Touring  Roof TOP TENT OPTION rack Kits includes:

2 One Piece Mild Steel Infolded ROOF RAILS:
8 abs spacers. 
48 20ml x High Tensile Hex Bolts for rails to feet and planks to rails.
86 washers.
48 nylex nuts.
1 Tube Sikka flex Adhesive sealant.
8 x 40mm Hex Head bolts for feet to vehicle. 
2 x Low Mount One Piece Roof rails - Folded at 105 degrees with 2 Tough Touring logo's fitted on sides 
8 x Rack Feet - Folded at 75 Degrees - Designed to fit Front and Rear Inside the roof rail, middle one outside the rail for maximum anti twist and easy installation.

RACK PLANKS:
 
3 Tough Touring TOP HAT Bar planks - (Ultimate strength) - best suited for wider tents and or point loads - Available in 1350 ,1400, 1450, 1550mm
 
All parts cut in Australian MILD Steel, SandBlasted for Maximum Paint Bond  and Powdercoated in Black Dulux Textura for ultimate durability and rust resistance.