Listed above is a set of Tough Touring Gutter Roof Rack Foot rails,  This Kit is the Rack feet  and clamps required to fit a Tuff Trek Mk3 roof top tent directly to a gutter rail truck without any crossbars.
 
This kit has the roof rails fold 'Outwards, Outfolded' to allow easy access to the bolts from the outside edge of the rack and up into the tent base. 
 
If you choose to use the Tough Touring Foot rails for 3rd party roof rack baskets - It is wise to opt for the 'INFOLD' foot rails option, as this brings the top edge of the foot rails in towards the centre of the vehicle, providing a narrower mounting surface, Most roof rack basets you can purchase are built to match the natural outline of the vehicle and are thus quite narrow... The 'Infold' foot rails will thus almost always be about the same width as typical platform racks you can buy for your truck. Please measure carefully - the tops of our Foot rails are slotted with heaps of mounting points - usually you'll get most racks to just bolt right up, don't buy this kit if your afraid to drill an extra hole or two in the top plate to marry up your 3rd party rack platform... 
 
The Top fold out or in section of the Tough Touring Foot rails is approx 50mm wide, and the feet are angled inwards at 80 degrees. We would advise carefull measuring of your vehicles roof width before purchasing any platform . 
 
More information and fitting instructions will be published as we get some installations done and pictures etc of the builds. 
 
If your not sure what type of rack classification your vehicle has - Please read the information on this page here - https://www.toughtouring.com.au/rooftoptentroofracks
 
The Kit comes with: 
2 x 1 Piece Roof rails, (Your choice of Dual cab , Roof Rail Wagon or Gutter Wagon Type) Powdercoated in Black Dulux Textura
Foot clamps, double bolted, spot welded anti flex clamp design is about the strongest weve ever seen. 
+ required High tensile Dome Nuts / washers and or Bolts to bolt up the clamps.
Comes pre assembled.