TRADE - 4 SETS Bush Company Awning to Bundutop tent Brackets
These brackets provide twin 3mm plate steel ridgid Awning Mounts,They are strong enough to handle the Bush Company XT Max and all other known Awnnigs they make..
The Kit is similar to our 'Universal Awning to bundutop tent brackets' however it does not include the Hook bracket or rear hook stabilisation plate - as the Bush company awning cannot use the hook due to the way the canvas on the awning arm finishes on the bottom...
The Brackets Mount "inset' on the tents sides - Providing a shorter awning footprint for the shorter Bush company awnings, as well as making for a tighter swing gaps between tent and awning at the rear.
The Kit comes complete with
- Sealed Rivetts and 10/6 High Tensile M8 Bolts to help ensure a quality fit up. Videos are provided on our you tube channel to assist home builders and pro fitters alike.
The Kit supports :
The Bush Company XT MAX, XT 270, XT 180 and XT 180 Double End -are all supported and work in well with this kit.,
Basic Tips on instructions here - (Watch the numerous You tube videos linked on the page below)
https://www.toughtouring.com.au/product-page/bundutop-tent-to-ostrich-awning-brackets
BUNDUTOP TENT NOTES:
The Bundutop Tent is shorter than most at just 2.1m long, and its large flat faces make it ideal for fitment of awnings - The Bundutop tent is Capable of taking Double ended Bush company XT 180 Awnings - as well as the XT max - However we do reccommend carrying poles and Guy ropes for any 180 section of the awning, as these awnigns have uneven twist behaviour in even mid strength wind -thus exerting added twist pressure on just the one side of the tents they are fitted too..
AWNING Postitioning INFORMATION IMPORTANT
MEASURE and Check. The awnings are usually about 20cm top to bottom thickness - Ensure there is room beside the tent and if its a clamshell tent, below it as well ... Open doors etc, check they will open under the installed awning.