Toyota 200 Series Platform Roof Rack
Tough Touring makes a Super Low mount, outward folded Platform roof rack for the Land Cruiser 200 Series
Its a Versatile Design, Allowing Owners to change between roof tent and platform easily.
Pole less wing awnings can also be incorporated into the Platform if desired. The Listing for the Awning brackets is here https://www.toughtouring.com.au/product-page/awning-to-tough-touring-platform-rack-brackets
Our custom designed roof rack foot rails and crossbars come in an "outfolded" Configuration - Creating the lowest and strongest mounting rack we can build.
All parts cut in Australian MILD Steel, SandBlasted for Maximum Paint Bond and Powdercoated in Black Dulux Textura for ultimate durability and rust resistance.
*Unique Design means all bolts to roof rack planks are accessable from beside the vehicle for easy removal once fitted.
ABOUT THE TOURING PLATFORM OPTION
1 x 1400 x 2100mm Touring Platform,
Required Fitting Hardware the same as above Roof top tent rack hardware, foot rails, spacers etc... are all included
Please tell us if your fitting a roof tent
Technical / Fitting
Fitting:
Tough Touring roof rails can be fitted by any roof rack fitter, or yourself if your handy. Included is a tube of Sikkaflex 221 Automotive sealant and new High tensile steel mounting bolts. Adding the rail planks is easier on the back - as the unique design of the TT roof rails allows all bolts to be accessed from beside the vehicle.
Adaptability:The Roof racks have been designed by us to to accomomodate awnings and roof top tents specifically without fouling on Vehicle wind fairings etc on most popular awning brands available toda
Our Vehicle Specific 'One Piece ' roof rail Kits for the vehicles above follow the vehicles roof lines perfectly while positioning the rack precisely around foul points / Protruding wind fairings - they have been tested with most of the awning and tent combinations listed and are the closest possible fit we can achieve.
Listed on the Store page are extra Top hat bar planks to add to your roof rail while the tent is removed - You would typically require at least 4 slats to create a functioning roof rack. (The Front and Rear Tough Touring Slats remain on the rails as the tent is lifted off, two slats would go up and off still fixed to the tent, So purchase an additional 2 slats - Bolt them on while the tent is off, and fitted you would then have 4 slats back on the car for a functioning rack - (and no need to remove the awning...Which stays fitted to the front and rear tough touring slats.) You could add up to 10 in total....