Tough Touring Roof top tent Shower Cubicle brackets bolt straight to the majority of roof top tents using the tents side bolt track profiles - 
 
The Brackets Can be fixed anywhere along the lower sidewall extrusion of the tent, and can even be positioned right at the end of the tent if required (Bracket can be mounted so as to 'wrap' around a corner of the tent) , The Tough Touring Shower Cubical brackets provide and excellent stiff and sturdy mount point. They can be fitted around External Gas struts, Latches and other foul points. 
 The Slotted mount point accepts 50mm right out to 135mm spaced bolt patterns and accommodates quick pitch and alucabs 50 x 50mm patterns as well. (Sqare 4 point bolt positions) 
 
The brackets bolt up to any single track m8 extrusion, they have built in spacing to put the shower cubicle  out and around gas struts.
 
This bracket is typically perfect for  the majority of Chinese built roof top tents with m8 bolt track built into their lower tent profile extrustions... (Even Slimline / light tents .,.. there is no other known bracket system as strong. 
 
Please note that 'slimline' tents with very low profile base sections  and single Bolt track can often successfully run these brackets, however strength is compromised and poles should be deployed when in use. RTT with Twin Bolt Tracks tend to have much better strength and stiffness overall and often have better options to move latches and hinges  - as such are reccommended over slimline single track tents for hanging Pole less awnings or Shower Cubes
 
TO TEST YOUR ROOF TENT AND SEE THAT THEY WILL FIT
 
Its likely that your chinese manufactured tent has a single m8 bolt slot on both its top and bottom side profile, to test if the tent will take the brackets - Just slide an M8 bolt head  into the track and see if it slides in Ok... If it does - The brackets will fit, If it does not, other bolts or square nuts will work too, you will just have to find the bolt head type that works for your tent. 
 
At time of writing there were over 75 variations of similar Roof top tents coming out of china - they all have various latches and securing clips / hinges, and typically all use the same mounting bolt track as our brackets - To fit our brackets to the tent - Its necessary to un-do and move some of the fittings, typically you can move them a few centimeters furter inwards or outwards to give you the room to add awning brackets without any effect on the tents security. 
Some fouling of the spring steel poles is avoided by moving the bolt track that retains the poles to the top edge further back along of the tent base. 
 
Known Supported Tents"
San Hima
​
Kalbarri Gen 1 Series (Slimline)  
Kalbarri Gen 2 (Solid Twin Bolt track base )  
 
OCAM
OCAM Aluminium Hardshell Roof Top Tent - 
 
Darche
Solar Roof Top Tent
Buffalo 1535 Hard Shell Rooftop Tent
Ridgeback series Hard Shell Rooftop
Streamliner
 
23Zero
Onyx Series 
Saber SeriesMax 
​
OZtrail
Canning RTT 
​
Oztent
Apex Series
​
Beach2bush
Desert Storm (Slimline) 
Outback Explorer
 
Motop Roof Top Tent
All models are Slimline class and can take our brackets except the Fold out and side fold models.
 
CSS Touring™
All Models of Slimline Tents 
​​
camp boss
Most Models are Slimline class but can take our brackets
 
Kings​​ 
Grand Tourer Mk2, 3 and Sports lite 
Sturdy Double slots on the Grand Tourer make them Suitable for Pole less awning mounts. 
​
Boab/ Iron Man 
(Basically Same Tents) feature Double Slotted base and are strong sturdy tents to mount too.