This Bracket set allows Fitment of Pole less 270 Wing awnings to Dual Cab Utes - Bridging the articulation Point - typically these kits are customised here at our workshop EVERYTIME, so the pictures above show combinations of various ones we've done for customers trucks.
 
To get these built - Our Front and rear brackets are customised via an SMS of your vehicle to our workshop... Please take a photo of the front rack / (or bar) and the rear rack / bar or canopy top.
 
PLEASE SEND PHOTS TOO:
Our SMS NUMBER IS 0408 390 078
 
All brackets front and rear have integrated slotted mounts, with tollerences for adjustments up and down +_ 40mm or so.
 
There kits are working perfectly on about 40 awning types we've listed now, and the list grows... 
Brackets are double slotted to accept majority of awnings on the market. You may have to drill a hole in the case of a destination 4x4 awning as they have a 30 x 50 x4 bolt pattern... Every other known awning bolts straight up. 
 
We would not advise to use this kit in combination of any forward folding awnings, it is best suited to rear 270 WIngs Only. 
 
PLEASE NOTE: IF YOU WISH TO FIT A FORWARD FOLDING AWNING... Poles are typically required 
 
Build for dual cabs like the 79 series, Nissan Navara, amarok, Dmax, Ranger, Hilux etc, We have honed this bracket set to perfection !
 
Version 8 now in General Release... We have descided to combine the existing racks bracketse available here - with twin layer 'flexing' 2nd point bracket being added to the front bracket to allow further twist...
Bolt patterns are cut at 150mm high x 50mm in twin rows.