Bush Company Awning to Bundutop tent Brackets MID or UP mount
This listing is for Bush Company Awning to Bundutop Tent brackets.'Bush wakka,' 'Ostrich wing', or 'Bundutec' Awnings...
The Kit comes with 4 parts and hardware required.. The Awning back plates have through bolt options on the face plates to suit heavy awnings like the Bush Company xt Max...
There is NO HOOK BRACKET WITH THIS SET.
These brackets provide twin 3mm plate steel ridgid Awning Mounts, as well as a trailing awning arm hook bracket support. They are strong enough to handle all known heavy duty of Pole less awnings.
This brackets set is manufactured in Australia - they features additional stiffening and push the awning back plate approx 20mm out from the edge of the bundutop.
The Awning comes in a MID mount or an UP mount. This Pictures on Listing is for the 'MID MOUNT " variety Mid mount places the awning pretty much flush with the tents base, perfect for most installations of bundutop tent to canopies or roof racks, while the up mount adds an additional 50-80mm of height if you need it. (UP mounts are sometimes required for low vehicles or Trailers). The UP mount varient gives an extra 50mm of height but loses about 30% of the stiffness, adding flex to the awning - The Up mount should only be chosen if you REALLY need the height over strength, and accept that even pole less awnings will need to drop poles early in any breeze.
The Mounting points facilitate Awning mounts right down to 1940mm spacing, with a wider option also for longer awings. The 'INFOLD' set up of these brackets brings the rear arm in as close as possible to the rear of the tent - preventing rain getting through any large gaps.
We have also now an integrated Adjustable hook bracket which is included in this kit, allowing adjustment of awning tension on the fly using a 13mm Spanner and 6mm Hex Allen key.
THe Kit is already built to handle 'Bundu Suite' installations,
The Kit comes complete with
- Sealed Rivetts and Videos are provided on our you tube channel to assist home builders and pro fitters alike.
SUPPORTED AWNINGS PLEASE READ:
These Brackets have fixed mounting points at 1940m apart. Shorter awnings cannot be installed...
BUNDUTOP TENT NOTES:
The Bundutop Tent is shorter than most at just 2.1m long, and its large flat faces make it ideal for fitment of awnings -
AWNING Postitioning INFORMATION IMPORTANT
Brackets fitted to Bundutop Tents sit flush with the base of the tent - making them OK to install directly onto the lid of canopy or Racks that are wider than the tents base...
All Other Tents Bracket systems (ALL CLAMSHELL TENT BRACKETS) DONT fit flush beside the tent and require the tent to sit on a rack ABOVE the canopy. Some tents like the EEzi Awn tents brackets have to sit below the tent as far as 90mm.
MEASURE and Check. The awnings are usually about 20cm top to bottom thickness - Ensure there is room beside the tent and if its a clamshell tent, below it as well ... Open doors etc, check they will open under the installed awning.