Awning to Tent Tuff Trek Mk 3 Brackets
This listing is the Tuff Trek Mk 3 Varient of our Universal Awning to tent brackets .
The Brackets place your awning directly beside the tent on the Passenger side, with the base of the awning back plate flush with the base of the tent.
Some fouling of the spring steel poles is avoided by moving the bolt track that retains the poles to the top edge of the tent base. (We add additional bits rather than remove the bottom one)
The Brack are strong enough to handle all known heavy duty of Pole less awnings.
This brackets set is manufactured in Australia - they features additional stiffening triangles on the bottom edge - the bracket is folded to negate the need for spacers, pushing the awning out approx 20mm out from the edge of the Tuff Trek Mk 3 tent.
The Mounting points on the brackets are slotted vertiacally to allow mutliple / maximum versatility on unknown mounting patterns on awnings.
We have also now an integrated Adjustable hook bracket
swing out measurement should be stated on their spec sheets.
The Kit comes complete with
- Sealed Rivetts
SUPPORTED AWNINGS PLEASE READ:
The Kit supports all known Pole Less awning types : (Quick Pitch, , Alucab 270, Howling moon 270 and 270 forward fold 180, Bundutec 360, Bundutec 270 and Bundutec 'L' Bushwakka 270 Extreme Darkness, Bush wakka 180 Extreme Next Gen (1950 back plate) , Eezi Awn Manta 270, Darche 180 double end and single end, Darche 270, 30 second awning, BushWakka 180/270 and forward fold 180/270, and BOSS 270 (BA 270 Awnings)
The Bush Company XT Max, XT 270, XT 180 and XT 180 Double End -are also now supported.
NOTES ON THE SUPPORTED AWNINGS / Bolt patterns.
ALUCAB and HOWLING MOONThis Kit now supports Alucab , Howling Moon , Bushwakka and quick pitch awnings (These awning run a 4 bolt x 50mm pattern and the Awning brackets supplied are now cut into this pattern to suit)
AWNING Postitioning INFORMATION IMPORTANT
Brackets fitted to Bundutop Tents sit flush with the base of the tent - making them OK to install directly onto the lid of canopy or Racks that are wider than the tents base...
All Other Tents Bracket systems (ALL CLAMSHELL TENT BRACKETS) DONT fit flush beside the tent and require the tent to sit on a rack ABOVE the canopy. Some tents like the EEzi Awn tents brackets have to sit below the tent as far as 90mm.
MEASURE and Check. The awnings are usually about 20cm top to bottom thickness - Ensure there is room beside the tent and if its a clamshell tent, below it as well ... Open doors etc, check they will open under the installed awning.