Customer Feedback has encouraged us to Provide the Components - unassembled for customers wishing to put the Unit together themselves, and thus understand its workings and save a dollar on the way. 
You can opt for the 1000,2000 or 3000w options from the drop box below - 
The 1000w kit comes with 2 x SB175 Anderson connections and plugs, the 2000w kit comes with 3 x SB175Andersons and plugs and the 3000w beast comes with 4 x sb 175 Andersons and Plugs... 
Aside from the Increased additional SB175 ports on the larger RPS (To allow More Modular Batteries) The rest of the componentry is the same on all models. 
The Components included in the ktis as follows: 
 
COMPONENTS LIST:
$350
Victron Smart  Isolated DCDC Charger - 30amp (Max 50amp) - 
$200
Victron Smart MPPT Solar Regulator 30/100
$100 Each
2 x Forever Powered BUS Blocks, heavy duty 5 x 35mm Lug copper BUS
$600 - ---$1450
Victron Phoenix Smart Inverter, RPS 1000 uses the VA 1200, ($600)  The RPS 2000 Uses the 2000va ($1150) and the Rps 3000 uses the Smart Phoenix 3000va ($1450)
$130
4 x Socket Mount Combination of  x USB /LED dispay and 12 Volt flush mount Chargers / accessory sockets
$290
12 x Forever Powered Assorted Anderson Plug Housings and or Blanks to accommodate below anderson ports - Color Coded / 3d Printed (Vary from $5 to $35 per component) 
Battery
AS PER SELECTION ON DROP DOWN MENU 
$335
Voltex all in one 15Amp 240 Outlet with RCD
$40 Each
SB 175 Anderson Connectors, (RPS 1000 gets 2, the RPS 2000 Gets 3 and The RPS 3000 Gets 4) 
$6 Each
6 x Grey Anderson SB50
$10 Each
1 RED and 1 Black Anderson SB 50
$600
PRE assembled Loom Kit, 35mm Heavy duty cable, lugs and anderson connections ready to push fit, Loom Kit includes Daisy chain 8 x Yellow Connectors , 4 x 8mm 50 amp cables with Anderson Ends Pre Crimped,  8 x 75 Amp Cable pre crimped for DCDC and Solar Chargers - and Crossober 25mm cabling (or larger) to cross connect all batteries via the Heavy duty BUS.
$25
Remote Inverter Switch with Cable
$1080
Tough Touring 3mm Aluminium Battery Case, Laser cut, 30 m8  Dome Head nuts and Washers for bolting off components and assembling box. Internal BUS block holders and  Nutsert (Captive Nuts) already pre insert for simple one way assembly. Box comes with a Forever Powered logo
$90 Each
2 x Short 35mm Battery Connecting Cables with Lugs one End, SB175 Anderson Plugs pre installed on other end. Cable lengths are 500mm... (You can purchase Longer Cables in the 'LOOMS' section of the website  the cable is 35mm Copper core *Expensive) 
$350
Labour, Packaging, Assembly and Testing of components pre ship
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
The 'Slim Jim' Base RPS is just 160mm Thick, 780mm Deep and 400mm high... LifePo4 Batteries Can be added ' Plug and Play' Via 2x Inlcuded 175Amp Anderson ports built into the unit. 
The 'SLIM JIM RPS 2000' Does not come with Batteries - We have seen them connected directly to the cranking battery with good results, but we'd reccommend a second Lifepo4 for use. 
 
Charge Time when Plugged into Vehicle and Exposed to sunlight with 400w Solar panel installed is around 3-4 hours from Flat to fully Charged with the Single DCDC model.
 
All Output plugs including the Cig Socket are wired in  individually to allow  them to handle up to  50Amp Current loads, Single Line set up like this also stops single point failure not knocking out other components. 
 
WEATHER RESISTANT BASH RESISTANT BOX: 
3mm Australian Made Aluminium Case - Removable top / sides and face console.  780mm deep x400  High x 145 mm wide
 
RECOMMENDED Battery(s) : 
 The Battery Capacity you need relates to the Inverter size. We'd reccommend as follows:
1200va - At Least 100 amphr -
2000va - At least 200amphr
3000va - At Least 400 Amphr.
 
The Batteries Supplied in the option drop downs are High Quality Slimline AGA batteries. They have oversized BMS - capable of constant load delivery of 150AMp per 100 Amp of Battery Capacity.
 
For tighter storage space requirements, you can opt for twin 100amphr Slimline batteries (in Lieu of a Single 200), these offer incredible performance and even smaller storage requirements. 
Info and specs here - These are included on the options list for the RPS 2000 unit below also

ADDITIONAL Leads Are not included - and will likely be required for typical 4wd use if you don't have them already. 
 
1 x 1m Solar Input cable - RED anderson to Red Anderson
12 Volt Output cables  - GREY anderson to GREY anderson ( for Fridges, Travel Buddies, Compressors etc)
1 x 1m Black to Black Anderson Extension .
75Amp MINIMUM rated DC Wiring Loom from Cranking battery to the RPS, We make and sell these as a kit https://www.toughtouring.com.au/product-page/dcdc-loom-kit-for-renewable-power-station-dual-battery
 
Generator Earth point built into each unit as per Aus Spec... You will need a cable and Spike to use this properly as per Safety regs in Australian Electrial laws.
 
This Box is designed to be weatherproof, however power through fittings cannot be used when wet and water ingress and damage to the unit is unavoidable if submerged.